Copyright © 2004 Nokia. All rights reserved.
Contacts
78
If you need a phone number-DTMF combination number for a contact, store the
phone number followed by the DTMF sequence in the Tel field. You can use the
following non-numeric characters:
To create contact groups
You can create contact groups to save time by sending e-mails and short messages
to all members of the contact group in one action.
1 With the Contacts directory main view displayed, press the Menu key and select
File > New group…. A blank group contact card opens.
2 Enter a name for your group.
3 To add contacts to the group, press Add member. A list of contact cards and
groups opens.
4 Select a contact and press Add. Note that you can add another contact group
to a group.
5 To attach a picture for the group, press > on the Arrows key to move to the
picture frame. Alternatively, press the Menu key and select Group > Insert picture.
A dialog displaying the contents of the default folder opens. Select a file and
press OK, or press Browse to search for a picture file.
6 To save the group contact card, press Done.
An example of a contact group with members is shown in Figure 33.
Figure 33
Character Function
*
#
The asterisk and hash symbols may be used if the DTMF service
requires them
p Inserts a pause of approx. 2 seconds before, or between, DTMF
characters
w If you use this character, the remaining sequence is not sent un-
til you press Send tone again during the call.
LindaDeepak_ri.fm Page 78 Monday, September 27, 2004 2:34 PM
To Next Page
Loading...
