Copyright © 2004 Nokia. All rights reserved.
Telephone
62
To change the profile in use, press the Menu key. Use the Arrows key to select the
Profiles icon at the right-hand end of the menu bar and a new profile from the
menu list.
Figure 21
To select and modify a profile, press the Menu key and select Settings > Profiles….
The profiles provided with your communicator are:
General - The default profile of the communicator.
Silent - You can set this profile on when you want all the alert tones to remain silent
(except Clock and Calendar alarms - see ‘Note’ on page 62).
Meeting - You can specify how the communicator operates when you are in a
meeting, such as setting the volume of the tones low.
Outdoor - You can specify how the communicator operates when you are outdoors.
Pager - You can set this profile on when you want the communicator to act as a
pager. The default settings are that there is no ringing tone and that you get an
alert tone for received short messages.
Flight - Sets the Flight profile on. For more information, see ’Flight profile’ on page
70.
Note: If you have turned on the Clock alarm or an alarm for timed entry in
Calendar, it remains on in all profiles, including Silent.
To create a new profile
1 To create a new profile, press the Menu key, select Settings > Profiles…, and press
New. The current values of the General profile are copied to the new profile, for
you to modify as you want.
2 To modify the settings of any of the profiles, highlight a profile name and press
Edit. A dialog with four pages opens, as shown in Figure 22. For each of the
pages, define the following:
Profiles icon
LindaDeepak_ri.fm Page 62 Monday, September 27, 2004 2:34 PM
To Next Page
Loading...
