©2001 Nokia Mobile Phones. All rights reserved.
7
Introduction
Access codes
The Nokia 9210 Communicator uses several access codes to protect against
unauthorised use of your communicator and SIM card. The access codes you need
most often are:
• the lock code (the predetermined default lock code is 12345), and
• the PIN code, which is provided with the SIM card.
You can change access codes that are used by both the phone and the
communicator interface via either of them, provided that the code can be changed.
For further details on access codes, see ‘Phone security’ on page 215.
The Internet applications of the communicator use passwords and user names to
protect against unauthorised use of the Internet and its services. These passwords
are changed in the settings of the Internet applications.
Contact information
Tip: You can synchronise
the contact information on
your communicator with a
corresponding application
on a compatible PC. See the
PC Suite Guide on the CD-
ROM for details.
All contact information that you store in the Contacts application, such as names,
addresses, and phone numbers, goes into the Contacts directory. The phone, the
communicator interface, and each of the applications have their own views of the
Contacts directory. The information shown depends on the information the
selected application can use. For example, when you are making a call via the
phone, you can view the name and phone number(s) of the contact. Possible fax
numbers, e-mail addresses, job titles, and so on, are not shown.
To Next Page
Loading...
