©2001 Nokia Mobile Phones. All rights reserved.
35
General information
Note:Remember to install applications in the same language as your
communicator.
Use the memory card in the communicator to gain more space for the different
applications and files on the CD-ROM.
Note:For information on the installable applications, see the Software on CD-
ROM Guide on the CD-ROM.
To activate the infrared connection
Tip: To activate the
infrared, you can also press
the Menu key and select
Tools > Receive via infrared.
1 Make sure that the infrared port of the communicator faces the infrared port
of the other device.
2 To activate the infrared connection, press Chr + (the key with the infrared
symbol; this key is on the right-hand side of the keyboard, next to the Enter
key).
3 To end the infrared connection, press Chr + again.
Note: Your communicator is a Class 1 Laser product.
To Next Page
Loading...
