Setting up BlackBerry Connect
10
Copyright © 2005 Nokia. All rights reserved.
Setting up BlackBerry Connect
You can modify BlackBerry Connect settings on your
device to suit your preferences.
Not all BlackBerry Enterprise Servers support all of these
features. For details on which features are supported by
your server, contact your IT department.
Using BlackBerry Connect while
roaming
1 Press Messaging, then Menu.
2 Select Tools → Account settings → BlackBerry →General.
3 Set Allow service when roaming to Yes to allow the use of
the BlackBerry service when you are not in your local
service area, and set it to No to disallow this.
4 Press Done to save the changes and exit.
Setting up wireless reconcile
1 Press Messaging, then Menu.
2 Select Tools → Account settings → BlackBerry →General.
3 SelectWireless reconcile.
4 If you have several BlackBerry services, select the
BlackBerry service that you want to set up, and press
Set up reconcile.
5 To reconcile deletions between server and device, select
Deletions, and set it On or Off .
6 To reconcile changes in read status between server and
device, select Read/Unread status, and set it On or Off .
7 Press Done to save the changes, and Done to exit.
Changing default sending service
1 Press Messaging, then Menu.
2 Select Tools → Account settings → BlackBerry
→Composing .
3 Select Send using to change the service that is used to
send new BlackBerry e-mails.
When you reply to or forward e-mails , they are sent
using the service to which they were delivered.
4 Press Done to save the changes and exit.
Searching for contacts for
BlackBerry messages
1 Press Messaging, then Menu.
2 Select Tools → Account settings → BlackBerry
→Composing .
3 Select Check names to set the location of searched
addresses. The following options are available:
• In local contacts only—only the addresses in the
contact databases on your device and memory
card are searched.
9244201_9300_9500_BlackBerry_Connectivity_EN.fm Page 10 Wednesday, August 31, 2005 3:58 PM
To Next Page
Loading...
