down arrow keys on the zoom keys (5), and the
right arrow key on the infrared key (6).
Tip: Press Esc to cancel selections and close
dialogs.
Tip: Press the backspace key to delete items
such as calendar entries and messages.
The communicator display turns on when you open the
cover. The application that was active the last time the
device was used is shown on the display. When you
close the cover, the communicator display turns off.
Desk main view
1—Menu. Press the Menu key to open the menu. You
can use the joystick or the arrow keys to move in the
menu, and press the enter key to select a menu option.
2—Folder. You can group applications, shortcuts, and
notes to different folders. See Creating new groups on
page 28.
3—Scroll bar. For example, if you have a long file in
Documents, the scroll bar helps you estimate where
you are in the file, and how much of the file you can
see. The longer the scroll bar, the more you can see of
the file.
4—Command buttons. The commands on the right
side of the display correspond to the command
buttons. Note that when a command is dimmed, it
cannot be used.
5—Application. To open an application from Desk,
select the application, and press Open or the enter key.
6—Indicator area. The indicator area shows
application and system-related information.
Multipage dialog
1—Dialog pages. You can move from one page to
another by pressing the menu key.
2—Selection list. You can view different options in a
selection list, and select one of them.
3—Command buttons. You can use the command
buttons to perform functions on a dialog page, or in a
selection list.
If there is more than one frame on the display, the
selected frame is always highlighted. You can move
between the frames by pressing the tab key.
Switching between open applications
To switch between open applications, press Menu,
select
, and select the application. You can also close
applications in the application list.
15
Getting started
Cyan
To Next Page
Loading...
