sender and the recipient information and the date,
or None for no cover page.
• Send fax—Select when to send the messages. If
you select Upon request, you must select a message
in Outbox, and send the fax from there.
On the Advanced page, define the following:
• Resolution—Select the resolution for your sent
and received faxes.
• ECM—Select whether erroneous fax pages are
automatically corrected during sending. Note that
also the receiving device has to support ECM.
• Resend—Select whether to resend All pages or
only the Missed pages if any fax pages failed to be
sent.
To edit settings for fax diverting or fax barring, press
Fax diverting or Fax barring.
Special message types
The device can receive different types of messages, for
example, text messages that contain data, operator
logos, ringing tones, bookmarks, or Internet access or e-
mail account settings.
The device can also receive service messages. Service
messages are notifications of, for example, news
headlines and may contain a text message or a link. For
availability and subscription, contact your service
provider.
Receiving provisioning settings
To view a message that contains connectivity settings,
select the message, and press Open. If the device asks
for a password, enter your password, and press OK.
Note that after three incorrect passwords, the message
is deleted.
To accept the settings and configure your device, press
Save. If you receive trusted server settings (basic
connectivity settings and the location of the server)
from your service provider, the settings are saved
automatically, and an information message is placed to
your Inbox..
Cell broadcast
In areas where the cell broadcast service is available
(network service), you can receive messages on various
topics from your service provider, such as weather or
traffic conditions. For available topics and relevant
topic numbers, contact your service provider. Note that
a packet data (GPRS) connection may prevent cell
broadcast reception. Contact your network operator for
the correct GPRS settings.
Go to Desk → Tools → Cell broadcast.
To open a cell broadcast message, select a topic, and
press Read.
Tip: To search for topics, enter a name or a
number of a topic in the search field.
To receive a specific topic, select the topic, and press
Subscribe. To stop receiving topics, select the topic,
and press Unsubscribe.
47
Messaging
Cyan
To Next Page
Loading...
