background. These connections may postpone the
closing of the connection.
Select the Other page, and define the settings.
• Ask before connecting—If you select Yes, a dialog
appears every time you connect to the Internet,
asking you to confirm the connection or to change
the Internet access point.
• GPRS operating mode—Select Always on to keep
the GPRS connection in alert mode and to switch the
packet data transfer on quickly when needed. If you
select On when needed, the device uses a GPRS
connection only when you start an application or
action that needs it. Note that if there is no GPRS
coverage and you selected Always on, the device
will periodically try to establish a GPRS connection.
To change the priority of Internet access points, select
Connections → Internet setup. Press Priority, select
an Internet access point, and press Move up or Move
down. When you establish a data connection, the
access points are searched for in the order you have
specified.
Selecting an Internet access
point
When you establish an Internet connection, you are
asked to select the Internet access point you want to
use for that connection. In the Network connection
dialog, select an Internet access point from the list, and
press Connect. Before connecting, you can filter the list
of access points according to the network type. To view
all Internet access points, select All networks. To view
Internet access points that are currently available, press
Show available. For example, if you are using the
Offline profile, no GPRS or GSM Internet access points
are shown in the list.
Tip: The Network connection dialog opens
only if you have selected Yes in the Ask before
connecting field in the general Internet access
point settings. To check the status of the
setting, select Desk → Tools → Control
panel, and Connections → Internet setup
→ Other page.
88
Control panel
Cyan
To Next Page
Loading...
