OmniSwitch 6360 Chassis Details Chassis and Power Supplies
page 3-20 OmniSwitch 6360 Hardware Users Guide April 2021
Chassis Status LEDs
The chassis provides a series of status LEDs located on the front panel. These LEDs offer basic status
information for hardware operation and port link and activity status.
LED State Description
OK Solid Green
Blinking Green
Solid Amber
System Diagnostics and AOS bootup OK.
System Diagnostics and AOS in progress
(i.e., performing diagnostics or booting).
System Diagnostics and AOS/fan/temp fail
VC Blinking Green
Blinking Amber
Off
Master (number of blinks identifies ID).
Salve (number of blinks identifies ID).
This unit is in shutdown mode or is not part of
a VC.
PWR Solid Green
Solid Amber
Blinking Amber
Off
Main power supply normal.
Main power supply fault (12V).
Main power supply fault (54V/PoE).
Main power supply not present.
RJ45 Port LEDs Solid Green
Blinking Green
Solid Amber
Blinking Amber
Valid port link (non-PoE).
Valid port link with activity (non-PoE).
Valid port link (PoE).
Valid port link with activity (PoE).
SFP Port LEDs Solid / Blinking Green
Solid / Blinking Amber
Uplink port / with activity.
VFL port / with activity.
To Next Page
Loading...