What to do if LAN1-4 LED is off on Nokia G-140W-C?
If the LAN1-4 LED on your Nokia Switch is off, first ensure that you are using the correct RJ45 Ethernet cable. Verify that the RJ45 cable is securely plugged into both the switch and your device. Finally, check that the network interface on your computer or network device is working correctly.
How to fix Nokia G-140W-C Switch when POWER LED is off?
If the Power LED on your Nokia Switch is off, make sure the power button is in the ON position. Also, verify that the power adapter is correctly connected to the device.
What to do if TEL1 LED is off on Nokia G-140W-C?
If the TEL1 LED is off on your Nokia Switch, check that the RJ11 cable is properly connected at both ends. Additionally, make sure the telephone set is not in off hook status.
Why is the LINK LED off on my Nokia G-140W-C Switch?
If the LINK LED on your Nokia Switch is off, check that the fiber optic cable is properly connected at both ends.
General| Operating Temperature | 0°C to 40°C |
|---|---|
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Wi-Fi | 802.11 b/g/n |
| Power Supply | 12V DC |
| Dimensions | 140mm |
| Ports | 1 x USB |
Guidelines for safe and proper installation of the device, including power, ventilation, and environment.
Safety measures for operating the device, covering repair, cleaning, liquid handling, and ventilation.
Information on laser radiation hazards associated with fiber optic cables and safe handling procedures.
Overview of the G-140W-C device's capabilities, including user interfaces and supported functionalities.
Details on environmental requirements and power specifications for the G-140W-C device.
Detailed description of the device's front and rear panels, including LED indicators and ports.
Instructions for mounting the device and connecting cables, including Ethernet, TEL, and optical interfaces.
Guidance on connecting various interfaces like RJ45 Ethernet, RJ11 voice, and the optical PON interface.
Common problems with LED indicators and their possible solutions for the G-140W-C device.
Table indicating the presence of hazardous substances (Pb, Hg, Cd, Cr6+, PBB, PBDE) in device components.
Compliance statement regarding FCC rules for digital devices and potential radio frequency interference.
Information on FCC radiation exposure limits and safe installation distances for the equipment.
To Next Page