The headset switches to pairing mode, and a green indicator light starts to flash
quickly.
4 Within 3 minutes, switch Bluetooth on in your phone, then set it to search for
Bluetooth devices. For details, see the user guide of your phone.
5 Select the headset from the list of found devices.
6 If needed, type in the passcode 0000.
With some devices, you may need to make the connection separately after pairing.
When the headset is paired to your phone and is ready for use, the green indicator
light flashes about every 5 seconds.
Basic use
Wear the headset
Use the clip to attach the headset to your clothing.
To have the earpiece within easy reach when not using the headset, put the plug that
is attached to the earpiece cable into the charger connector.
5
To Next Page
Loading...
