© 2010 Nokia. All rights reserved. 7
When the headset is connected to
at least one device and is ready for
use, the blue indicator light
flashes slowly. If the headset has
not been paired with a device, it
automatically enters pairing
mode.
Switch the headset off
Place the earpiece into the storage
slot. The headset beeps, and the
red indicator light is briefly
displayed.
If the headset is not connected to
a device within about 30 minutes,
it switches off automatically.
Pair and connect the headset
Before using the headset, you
must pair and connect it to a
compatible device.
You can pair the headset with up
to eight devices, but you can
connect it to a maximum of two
devices at a time.
If voice prompts are activated, the
headset guides you with audible
notifications when you pair and
connect it.
To pair and connect the headset to
a device:
1. Make sure your mobile device is
switched on and the headset is
off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The
headset enters pairing mode,
and the blue indicator light
starts to flash quickly.
To Next Page
Loading...
