ENGLISH
Manage two calls
To manage two calls at the same time,
your mobile device must support the
Bluetooth Hands-Free Profile 1.5, and
call waiting must be activated in the
device. Call waiting is a network
service and is available when the
headset is connected to only one
device.
To answer a waiting call and end the
active call, press the answer/end key.
To answer a waiting call and put the
active call on hold, press and hold the
answer/end key for about 2 seconds.
To end the active call and make the
call on hold active, press the answer/
end key.
To switch between the active call and
the call on hold, press and hold the
answer/end key for about 2 seconds.
Turn lights on or off
By default, the indicator lights are
shown in all situations. To turn the
lights off in some situations (for
example, during a call or when the
headset is connected to a cell phone)
or back on, press and hold the answer/
end key and the volume key for about
5 seconds when the headset is
connected to a device. The yellow
indicator light flashes once.
To turn the lights back on, press and
hold the answer/end key, and slide and
hold the volume key up for about
5 seconds. The yellow indicator light
flashes once.
Allow connection to two
devices
You can have the headset connected
to two devices at the same time.
By default, the headset can only be
connected to one device at a time.
9218881_EN-US_1.fm Page 9 Friday, September 11, 2009 6:01 PM
To Next Page
Loading...
