ENGLISH
To use the headset with the earloop,
attach the earloop to it (12). To detach
the earloop, gently pull it from the
headset. Slide the earloop behind your
ear (10), and point the headset toward
your mouth (11). Push or pull the
earloop to set its length.
Adjust volume
The headset automatically adjusts the
volume according to ambient noise. To
manually adjust the volume, slide the
volume key up or down. To adjust the
volume quickly, slide and hold the key.
The selected volume level is saved for
the device that you currently use with
the headset.
Calls
To make a call, use your mobile device
in the normal way when the headset is
connected to it.
To redial the number you last called
(if your mobile device supports this
feature with the headset), when no
call is in progress, press the answer/
end key twice.
To activate voice dialing (if your
mobile device supports this feature
with the headset), when no call is in
progress, press and hold the answer/
end key for about 2 seconds. Proceed
as described in the user guide of the
mobile device.
To answer or end a call, press the
answer/end key. To reject a call, press
this key twice.
To mute or unmute the microphone
during a call, press the volume key. The
headset beeps, and a related icon is
displayed on your device (if supported
by the device).
To switch a call between the headset
and a compatible connected device,
press and hold the answer/end key for
about 2 seconds.
9218881_EN-US_1.fm Page 8 Friday, September 11, 2009 6:01 PM
To Next Page
Loading...
