feature with the headset), when no
call is in progress, press the answer/
end key twice.
To activate voice dialling (if your
mobile device supports this feature
with the headset), when no call is in
progress, press and hold the answer/
end key for about 2 seconds. Proceed
as described in the user guide of the
mobile device.
To answer or end a call, press the
answer/end key. To reject a call,
press this key twice.
To mute the microphone during a
call, slide the mute key towards the
microphone. To unmute, slide the
key to the opposite direction.
To switch a call between the headset
and a compatible connected device,
press and hold the answer/end key
for about 2 seconds.
Manage two calls
To manage two calls with the
headset at the same time, your
mobile device must support the
Bluetooth Hands-Free Profile 1.5,
and call waiting must be activated in
the device. Call waiting is a network
service and is available when the
headset is connected to only one
device.
To answer a waiting call and end the
active call, press the answer/end key.
To answer a waiting call and put the
active call on hold, press and hold the
answer/end key for about 2 seconds.
To end the active call and make the
call on hold active, press the answer/
end key.
To switch between the active call
and the call on hold, press and hold
the answer/end key for about 2
seconds.
Activate or deactivate
vibration
You can set the headset to vibrate
and flash the indicator light when
you receive a call.
ENGLISH
To Next Page
Loading...
