Basic use
24
To select the language for the texts shown on the headset
display, select Language. Scroll to the desired language, and
press the answer/end key twice. The language is updated
from the connected Nokia device if the device provides the
language setting.
To set the display brightness, select Brightness. Scroll to the
desired level, and press the answer/end key.
To restore the original settings, select Reset, and press the
answer/end key to confirm the operation. See also “Clear
settings or reset,” p. 25.
■ Switch between connections
If the headset has been paired with two compatible devices
(for example, a PC and mobile device), you can switch the
connection between them. Ensure the other device is
available for connection, and press and hold both volume
keys at the same time.
HS-76W_UG_draft9_with_FCC&IC_notice.fm Page 24 Thursday, May 10, 2007 5:20 PM
To Next Page
Loading...
