Nokia BH-902 - Clear Settings or Reset

Basic use
25
■ Clear settings or reset
To restore the original settings of the headset, use the
Setup > Reset function described in “Menu functions,”
p. 21. Alternatively, switch off the headset, press and hold
the power key and answer/end key, and press the answer/
end key to confirm the operation.
To reset the headset if it stops functioning, although it is
charged, plug the headset into a charger, and press the
power key and the answer/end key at the same time. The
reset does not clear the pairing settings.
HS-76W_UG_draft9_with_FCC&IC_notice.fm Page 25 Thursday, May 10, 2007 5:20 PM