Nokia C1-01 / C1-
RM-607 / RM-608
15 Confidential | Copyright © 2010 Nokia | All rights reserved Version 2.0
19) Remove the ENGINE BOARD.
20) Use the sharp end of the SS-93 to release the
EARPIECE / SPEAKER / VIBRA.
21) Remove it with the tweezers. 22) Release the DC JACK with the DC plug.
23) Remove it with the tweezers. 24) Use the sharp end of the SS-93 to release
ANTENNA MODULE clip and then use the flat end of
the SS-93 to release the bottom end of the ANTENNA
MODULE.