Insert a microSD card
Use only compatible microSD cards
approved by Nokia for use with this
device. Nokia uses approved industry
standards for memory cards, but some
brands may not be fully compatible with
this device. Incompatible cards may
damage the card and the device and
corrupt data stored on the card.
Your phone supports microSD cards with
a capacity of up to 8 GB.
A compatible memory card may be
supplied with the device, and may already
be inserted in the device. If not, do the
following:
1 Open the cover of the memory card
slot.
2 Insert the card into the memory card
slot with the contact surface facing
up, and press until it locks into place.
3 Close the cover of the memory card
slot.
Remove the microSD card
Important: Do not remove the
memory card during an operation when
the card is being accessed. Doing so may
damage the memory card and the device,
and corrupt data stored on the card.
You can remove or replace the memory
card during phone operation without
switching the device off, but you need to
ensure that no application is currently
accessing the memory card.
Connect a USB data cable
Connect a compatible USB data cable to
the USB connector. You may need to
purchase a USB data cable separately.
Get started 9
© 2011 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
