Enable remote locking
1 Select Menu > Settings and Phone > Phone mgmt. > Security settings >
Phone and SIM card > Remote phone locking > Enabled.
2 Enter the text message content. It can be 5-20 characters, and both upper and lower
case letters can be used.
3 Enter the same text again to verify it.
4 Enter the lock code.
Send the lock message
To lock the device remotely, write the predefined text, and send it to your device as a
text message.
To unlock your device, you need the lock code.
Connectivity
Internet connections
Define how your device connects to the internet
Your device automatically checks for and connects to an available known network when
a network connection is needed. Selection is based on the connection settings, unless
there are application-specific settings applied.
Select Menu > Settings and Connectivity > Settings.
Automatically switch to a known wireless local area network (WLAN) connection
when available
Select Switch to WLAN > Known WLANs only .
You can also connect to WLANs manually using the WLAN wizard application.
Only use a WLAN connection
For WLAN connections when in your home network, select Data use in home
netw. > WLAN only. For WLAN connections when outside your home network, select
Data use when roaming > WLAN only.
Automatically use a packet data connection when in your home network
Select Data use in home netw. > Automatic.
To set the device to request confirmation before connecting, select Data use in home
netw. > Always ask.
Request confirmation before using a packet data connection when outside your
home network
Select Data use when roaming > Always ask.
100 Connectivity
To Next Page
Loading...
Need help?
General
Weight and Dimensions
