4 DKU-5 Data Cable Installation and Configuration Guide
2 Software/hardware
installation
Before you can use the DKU-5 Data Cable (also
known as Nokia Connectivity Cable DKU-5), you
must install the necessary software and drivers for
use by Windows Plug and Play.
The Nokia software installation program loads the
correct device drivers and software. These files are
used by Windows to configure your system
automatically the first time you connect the cable.
• INSTALL THE SOFTWARE
Please make sure no other applications are running.
1
Insert the Nokia CD-ROM into your computer’s drive.
2 Select the software installation option from the CD’s
menu.
If the Nokia CD’s menu does not appear or your CD-
ROM drive’s autorun option is disabled, double-click
index.htm (found on the CD-ROM).
3 Click Next to begin the software installation.
4 Click Finish to complete the software installation.
Windows 98/ME users, please reboot your computer
when prompted to complete installation.
DKU5_install.book Page 4 Monday, December 16, 2002 12:07 PM
To Next Page
Loading...
Need help?
General