Creating Internet connections
4
Copyright © 2006 Nokia. All rights reserved.
Creating Internet connections
Creating an Internet access point
for data calls
1 Select Menu→ Tools→ Settings→ Connection→
Access points.
2 The list of existing access points is shown. Press
Options
→ New access point to create a new Internet
access point.
To use an existing access point as a basis for the new
one, select Use existing settings. To start with an empty
access point, select Use default settings.
3 Define the following settings:
• Connection name — Type a descriptive name for the
Internet access point, such as My Data Call
Internet.
• Data bearer — Select Data call or speed data (GSM only).
• Dial-up number — Enter the modem telephone
number of the acess point. Remember to type +
before international numbers.
• User name — Enter your user name if required by the
service provider. User names are often case-sensitive
and provided by your service provider.
• Prompt password — Select Yes to enter your password
each time you log into a server or No to save the
password in your device memory and automate the
login.
• Password — Enter your password if required by the
service provider. The password is often case-
sensitive and provided by the service provider.
• Authentication — Select Secure to always send your
password encrypted or Normal to send your password
encrypted when possible.
• Homepage — Enter the Web address of the page you
want to display as a home page when you use this
access point.
• Data call type — Select Analogue or ISDN. This setting
depends on both your GSM network operator and
Internet service provider, because some GSM
networks do not support certain types of ISDN
connections. For details, contact your Internet
service provider. If ISDN connections are available,
To Next Page
Loading...
Need help?
General
Weight and Dimensions
