EasyManuals Logo

Nokia E50 Configuration Guide

Nokia E50
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Creating Internet connections
6
Copyright © 2006 Nokia. All rights reserved.
Creating an Internet access point
for packet data (GPRS)
1 Select MenuToolsSettingsConnection
Access points.
2 The list of existing access points is shown. Press
Options
New access point to create a new Internet
access point.
To use an existing access point as a basis for the new
one, select Use existing settings. To start with an empty
access point, select Use default settings.
3 Define the following settings:
Connection name — Type a descriptive name for the
Internet access point, such as My GPRS Internet.
Data bearer — Select Packet data.
Access point name — Enter the name for the access
point. The name is usually provided by your service
provider or network operator.
User name Enter your user name if required by the
service provider. User names are often case-
sensitive and provided by your service provider.
Prompt password — Select Yes to enter your password
each time you log into a server or No to save the
password in your device memory and automate the
login.
Password — Enter your password if required by the
service provider. The password is often case-
sensitive and provided by the service provider.
Authentication — Select Secure to always send your
password encrypted or Normal to send your
password encrypted when possible.
Homepage — Enter the Web address of the page you
want to display as a home page when you use this
access point.
4 After setting up a basic Internet access point for Packet
data (GPRS), select Back to save the settings and exit,
or Options
Advanced settings to define the following
advanced settings:
Network type — Select IPv4 or IPv6 as the Internet
protocol type. The Internet protocol defines how
data is transferred to and from your device.
Phone IP address — Enter the IP address of your
device. Select Automatic to have the network
provide the device IP address. This setting is
available only if you have selected Network type
IPv4.
DNS address — Enter the IP addresses of the Primary
DNS address and Secondary DNS addr. if required by

Other manuals for Nokia E50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nokia E50 and is the answer not in the manual?

Nokia E50 Specifications

General IconGeneral
BluetoothYes
2G standardsGPRS
FM radioNo
Zoom capabilityx4, digital
Rear camera typeSingle camera
Rear camera resolution1280 x 960 pixels
Video capture resolution (max)176 x 144 pixels
Ringer typePolyphonic
Panel typeTFT
Display resolution240 x 320 pixels
Display number of colors262144 colors
Internal memory70 MB
Multimedia Messaging Service (MMS)Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Bundled softwarePC Suite
Product colorBlack, Silver
Talk time (2G)6.8 h
Battery capacity970 mAh
Standby time (2G)216 h
Weight and Dimensions IconWeight and Dimensions
Depth43.5 mm
Width113 mm
Height15.5 mm
Weight104 g

Related product manuals