Step 2
Charge the battery
1 Connect a compatible charger to a wall
outlet.
2 Connect the power cord to the device. If the
battery is completely discharged, it may take
a while before the charging indicator starts
scrolling.
3 When the battery is fully charged according
to the battery level indicator
, disconnect
the charger from the device, then from the wall outlet.
First start-up
1 Press and hold the power key .
2 If prompted, enter the PIN code or lock code, and select OK.
3 When prompted, enter the country in which you are located and the current date
and time. The Welcome application opens.
4 Select from the various options, or Exit to close the application.
To configure the various settings in your device, use the wizards available on the
home screen and the Settings wizard application (Menu > Tools > Setting wizard).
When you switch the device on, it may recognise the SIM card provider and
configure some settings automatically. You can also contact your service provider for
the correct settings.
You can switch the device on without inserting the SIM card. The device starts up in
the offline mode, and you cannot use the network-dependent phone functions.
To switch the device off, press and hold the power key.
© 2008 Nokia. All rights reserved.
To Next Page
Loading...
