Nokia E7-
RM-626
20 Confidential | Copyright © 2010 Nokia | All rights reserved Version 1.0
43) Remove the BLACK COAX CABLE with the
tweezers.
44) Release also the WHITE COAX CABLE connector
with the SS-231. Remove it with the tweezers.
45) Use the AV plug to lift up and release the AV JACK.
Discard the AV JACK.
46) Use the tweezers to lift up and remove the
POWER KEY.
47) Open up the device as shown and unscrew the
four Torx+ size 4 screws in the order shown. Do not
use them again. Discard them.
48) Turn the BASE CHASSIS ASSEMBLY to the other
side as shown and unscrew the four Torx+ size 4
screws in the order shown. Do not use them again.
Discard them.