Nokia E7-00 - Page 35

Nokia E7-
00
RM-626
Service Manual Level 1&2
35 Confidential | Copyright © 2010 Nokia | All rights reserved Version 1.0
61) Tighten the TORX + size 4 screw to the torque of
10 Ncm.
62) Remove the protective film from the TOP END
CAP.
63) Open the HDMI door. 64) Push the TOP END CAP into its place as shown.
Make sure the TOP END CAP is correctly in its place
and there are no gaps visible.
65) Tighten the two TORX + size 4 screws to the
torque of 10 Ncm in the order shown.
66) Close the HDMI door.