Get started
11
■ Charge the battery
The headset has an internal, nonremovable, rechargeable
battery. Do not attempt to remove the battery from the
headset, as you may damage the headset.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector on
the headset. When the charging starts, Charging is
briefly displayed on the headset. During charging, a
battery animation is displayed.
It may take a while before charging starts. If charging
does not start, disconnect the charger, plug it in again,
and retry. Charging the battery fully may take up to
2hours.
3. When the battery is fully charged, Battery full and
are displayed. Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power for up to 8 hours of talk
time or up to 150 hours of standby time. However, the talk
and standby times may vary with different compatible
HS-76W_UG_draft9_with_FCC&IC_notice.fm Page 11 Thursday, May 10, 2007 5:20 PM
To Next Page
Loading...
Need help?
General
