You don't need to charge the battery for a specific length of time, and you can use the phone while
it's charging.
When you start charging a completely empty battery, the start key
flashes until the screen wakes
up and the charging progress is shown.
If the battery is completely discharged, it may need to charge for up to 20 minutes before you can
use your phone. The charging indicator may not be displayed in this time.
Tip: You can use USB charging when a wall outlet is not available. Data can be transferred while
charging the device. The efficiency of USB charging power varies significantly, and it may take
a long time for charging to start and the device to start functioning.
Make sure your computer is switched on.
First connect the USB cable to the computer, then to your phone. When the battery is full, first
disconnect the USB cable from your phone, then from the computer.
The battery can be charged and discharged hundreds of times, but it will eventually wear out. When
the talk and standby times are noticeably shorter than normal, to replace the battery, take the device
to the nearest authorised service facility.
Charge your phone wirelessly
No need for hassle with cables, just pop your device on a wireless charger, and it immediately starts
charging.
The charging areas on the phone and the charger need to touch, so make sure you align the phone
and charger properly. Not all phone models fit in all chargers.
Nokia wireless chargers, such as the wireless charging plate DT-900, are sold separately.
Use only Qi compatible chargers for wireless charging.
1. Make sure the wireless charger is switched on.
2. Place your phone on the wireless charger so that the charging areas touch.
3. When the battery is full, remove your phone from the charger.
The charging area is highlighted.
© 2013 Nokia. All rights reserved.
11
To Next Page
Loading...
Need help?
General
