Note: Switch the device off and disconnect the charger and any other device before removing
any covers. Avoid touching electronic components while changing any covers. Always store and
use the device with any covers attached.
Make sure your phone is switched off.
1. At the top corner of your phone, put the nail of your index finger in the seam between the screen
frame and the back cover. Press the middle of the back cover, and bend the cover to loosen the top
hooks. Remove the cover.
Do not use any sharp tools, as they may damage the screen.
2. If the battery is in, lift it out. If there’s a tape attached to the battery, pull the tape to lift the battery
out.
3. Push the SIM into the SIM slot until it is fully inserted. Make sure the contact area is facing down.
© 2015 Microsoft Mobile. All rights reserved.
6
To Next Page
Loading...
Need help?
General
