Nokia N-GAGE QD - About data connections and access points

142
Copyright
© 2004 Nokia. All rights reserved.
About data connections and access points
Your game deck supports two kinds of data connections: a GSM data call ( )
and GPRS connection ( ). See also Essential indicators in the standby mode
.
A data connection is required to connect to an access point. There are three
different kinds of access points that you can define:
• MMS access point to send and receive multimedia messages
• Access point for Web to view WML or XHTML pages
• Internet access point (IAP) to send and receive e-mail or use N-Gage
Arena for games services. See N-Gage QD Arena launcher
.
Check with your service provider to determine the kind of an access point
needed for the service you wish to access. For availability and subscription to
data call and GPRS connection services, contact your network operator or
service provider. Most setting are available on http://support.n-gage.com
and
can be sent to your game deck as a text message.
Settings to make a data call
To insert a set of very basic GSM data call settings, select Tools > Settings >
Connection > Access points > Options > New access point. Fill in the
following information: Data bearer: Data call, Dial-up number: obtained
from service provider, User name, Data call type: Analog, and Maximum
data speed: Automatic.
Settings to make a GPRS connection
You need to subscribe to the GPRS service. For availability and subscription to
GPRS, contact your network operator or service provider.