147
Copyright
© 2004 Nokia. All rights reserved.
The following settings are shown if you have selected GSM data as the Data
bearer when starting to create the access point:
Use callback — This option allows a server to call you back once you have
made the initial call. Contact your service provider to subscribe to this service.
Callback type — Ask your service provider for the correct setting to use.
Callback number — Key in your game deck data phone number which the dial
back server uses. Usually this number is the data call phone number of your
game deck.
Use PPP compression — When set to Yes, this option speeds up the data
transfer, if supported by the remote PPP server. If you have problems with
establishing a connection, try setting this to No. Contact your service provider
for guidance.
To insert a login script, select Use login script > Yes. Insert the login script in
Login script.
PPP (point-to-point protocol) is a common networking software protocol that
enables any computer with a modem and a phone line to connect directly to
the Internet.
Modem initialization — Modem initialization string controls your game deck
using modem AT commands. If required, enter characters specified by your
GSM network service provider or Internet service provider.
To Next Page
Loading...
