nokia
CONNECTING PEOPLE
PAGE 16 (26) Approved 1.0
CMO Operations & Logistics
MGR
WW Competence Transfer Team
Multimedia Creation & Support CONFIDENTIAL 27.7.2005
Bochum / Germany
33.) Remove the residues of the Camera Rear Bezel
Assy Adhesive completely with the SRT-6.
For assembly always use a new adhesive.
34.) Remove the Camera Module 2MP with the SS-15
camera removal tool. Always use the RJ-94 rework jig
as support to prevent mechanical stress to the PWB.
For assembly only!
35.) Use the Assembly side of the SS-15 for fitting the
Camera Module 2MP into its compartment.
For assembly only!
36.) Mind the correct position of the camera while
assembling.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
To Next Page
Loading...
