3 Close the door. You cannot use the memory card if the
door is open.
Eject the memory card
1 Before you eject the card, press the power key, and select Remove mem. card. All applications
are closed.
2 When Remove memory card and press 'OK' is displayed, open the door of the memory
card slot.
3 Press the memory card to release it from the slot.
4 Remove the memory card.
5 If the device is switched on, select OK.
Important: Do not remove the memory card in the middle of an operation when the card
is being accessed. Removing the card in the middle of an operation may damage the
memory card as well as the device, and data stored on the card may be corrupted.
Switch the device on
1 Press and hold the power button ( ).
2 If the device asks for a (U)PIN code or lock code, enter
it, and press . The factory setting for the lock code
is 12345.
Your device has one internal antenna.
To Next Page
Loading...
