4
Insert the (U)SIM card and battery
A USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones.
Keep all SIM cards out of the reach of small children.
Always switch the device off and disconnect the charger before
removing the battery.
1 With the back of the device facing you, press and hold
the release button, slide the cover, and lift it up.
2 To release the SIM card holder, slide the holder to the
right, and lift the holder up.
3 Insert the SIM card into the card holder. Ensure that
the bevelled corner on the card is facing the bevelled
corner on the holder, and that the contact area on the
card is facing down. Slide the holder to the left, back to
the slot to lock the holder into place.
4 Insert the battery.
5 Replace the cover so that the locking catches are
directed towards their slots, and slide the cover into
place.