EasyManua.ls Logo

Nokia N90 - Call Waiting; Options During a Voice Call

Nokia N90
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Make calls
30
If you activate the Fold open mode during a video call,
sending your own video image stops because the camera
is not active. You can, however, still see the video of the
recipient.
Note: Even if you have denied video sending
during a video call, the call will still be charged as
a video call. Check the pricing with your network
operator or service provider.
To end the video call, in the Imaging mode or in the Fold
open mode, press .
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself
from the calls. To end the active call, press . To end
both calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for some
of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate handset, Activate
loudsp., or Activate handsfree (if a compatible headset
with Bluetooth connectivity is attached), End active call
or End all calls, New call, Conference, and Transfer.
Select from the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send MMS (in UMTS networks only)—To send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press to send the file to a
compatible device ( ).
Send DTMF—To send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press repeatedly. Select OK to send the
tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
9239225_N90_2_en.book Page 30 Tuesday, July 19, 2005 4:03 PM

Table of Contents

Other manuals for Nokia N90

Related product manuals