Bluetooth settings
Select
> Settings and Bluetooth.
Select from the following:
Bluetooth on — Activate Bluetooth connectivity.
Visible — Allow your device to be found by other devices. If
your device is hidden (not visible), it can only be connected
to by a previously paired device.
My device's name — Enter a name for your device. This
name is visible to other Bluetooth devices.
Tip: When searching for devices, some devices may show
only the device address (IMEI address). To find the address of
your device, select
> Phone and , and enter *#06#.
Pair devices
Devices with Bluetooth 2.1 and Secure Simple Pairing (SSP)
ability are paired automatically. Ensure that both devices
display the same passcode.
Pair with Bluetooth 2.0 or older devices
1 Your device proposes a passcode automatically. Before
pairing, create your own passcode (1 - 16 digits), and
agree with the user of the other device to use the same
code. The passcode is only used once.
2 Select
> Settings and Bluetooth.
3 Select Devices > New.
Your device lists the Bluetooth devices that are within
range and not hidden. The devices are indicated with the
following icons:
Computer
Cellular phone
Audio or video device
Other device
4 Select the device, and enter the passcode. The same
passcode must be entered in the other device as well.
5 To authorize the device to connect to your device without
your knowledge, select Set as trusted device. Use this
status only for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust.
6 Select Pair.
Cancel the pairing
Tap outside the dialog.
Do not pair with or accept connection requests from an
unknown device. This helps to protect your device from
harmful content.
Devices with no display, such as headsets, are connected
automatically after pairing.
40 Connect your device
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
