You can view the amount of transferred data from the
data counter (kB) shown on the display. The counter
shows the amount of network traffic when you browse
maps, create routes, or search for locations online.
To prevent the device from automatically downloading
maps through the internet, for example, when you are
outside your home cellular network, select Options >
Settings > Network > Use network > Never.
To define how much of the mass memory you want to
use for saving maps data or voice guidance files, select
Options > Settings > Network > Max. mass mem.
use (%). When the memory is full, the oldest map data
is deleted. The saved maps data can be deleted using
Nokia Map Loader PC software.
Nokia Map Loader
Nokia Map Loader is PC software that you can use to
download and install maps for different countries to
your device from the internet. You can also use it to
download voice files for turn-by-turn navigation.
To use Nokia Map Loader, you must first install it to a
compatible PC. You can download the PC software from
the internet at www.nokia.com/maps. Follow the
instructions on the screen.
You must use the Maps application before using Nokia
Map Loader. Nokia Map Loader uses the Maps history
information to check the version of map data to be
downloaded.
After you have installed the PC software to your PC, to
download maps, do the following:
1. Connect your device to the PC by using a compatible
USB data cable. Select Data transfer as the USB
connection mode.
2. Open Nokia Map Loader in your PC. Nokia Map
Loader checks the version of map data to be
downloaded.
3. Select the maps or voice guidance files you want,
and download and install them to your device.
Find a place
To view points of interest near your current location or
other locations on the map, select Options > Find
place > Nearby and a category.
To search for a point of interest by name, select
Options > Find place > Keyword search or start
entering the first letters of the name, and select Find.
To search for a location by address, select Options >
Find place > By address. You must enter the city and
country. To use an address you have saved to a contact
card in Contacts, select Options > Find place > By
address > Options > Select from contacts.
To view a search result on the map, press the scroll key,
and select Show on map. To return to the results list,
select Back.
87
Positioning (GPS)
To Next Page
Loading...
