Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
08.Jan.2007
18
Service Manual N95 RM-159/RM-245
Copyright © 2007 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
Page
(58)
UPPER BLOCK ASSEMBLY 12.
1. Assembly
2. Fit a new gasket and place the EARPIECE into the FRONT COVER.
3. Flip over the keypad.
4. Insert the ex foil of the display into the connector evenly.
5. Open the connector if necessary while inserting.
6. Carefully close the connector. Again, when destroying this
connector or parts of it, the whole SLIDE MODULE must be
replaced.
To Next Page
Loading...
