Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
08.Jan.2007
23
Service Manual N95 RM-159/RM-245
Copyright © 2007 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
Page
(58)
7. Keep all 6 adhesives of the BACK COVER clean, otherwise you
have to change them before re-assembly.
8. Gently pry open both plastic clips of the ITU KEYPAD.
9. Lift it up now and remove it.
10. Shift the assembly together and turn it to access the screws.
11. Unscrew the 4 torx plus size 6 screws in the order shown.
12. Remove all screws and discard them. Do not use them again.