03
GPS
1 Select Options >
Find place > Address.
2. Key in the address you
want to map and select
Options > Search.
Search for Locatons
To view points of interest near your current location
select Options > Find Place > Nearby, then choose
from Eat + Drink, Transport, Shopping, Leisure,
Sights and more!
To search for a specific location:
3. When the address has
been located, it is listed
on the screen.
2. Key in the start and end
point for the route.
Plan a Route
To plan a route from one location to another (i.e., from your home to your office):
3. To adjust the routing
settings, such as the mode
of transportation, select
Options > Settings > Routing.
QUICK TIP!
To zoom in or out on the map, press * or #. To
switch between the 2-D and 3-D views, press 0.
1. Select Options > Plan route. 4. Select > Use this place
and then Show on map.
5. The address is displayed
on a map. To move the
map, select Options >
Map options, then
choose from Zoom in,
Zoom out, 2D/3D
and more.
QUICK TIP!
The GPS receiver takes its power from the battery.
To conserve battery power, make sure the GPS is
turned off when not in use.
4. To view the route itinerary,
select Options > Show route.
The route is calculated using
the selected routing settings.
5. To track the route and your
current GPS position, select
Options > Start tracking.
p13 p14
To Next Page
Loading...
