E-mail settings
Manage mailboxes
Select Menu > Messaging and Options > Settings > E-
mail.
To select which mailbox you want to use to send and
receive e-mail, select Mailbox in use and a mailbox.
To remove a mailbox and its messages from your device,
select Mailboxes, tap the mailbox to be removed if it is
not already highlighted, and select Options > Delete.
To create a new mailbox, select Mailboxes > Options >
New mailbox. The name you give to the new mailbox
replaces Mailbox in the Messaging main view. You can have
up to six mailboxes.
Select Mailboxes and a mailbox to change the connection
settings, user settings, retrieval settings and automatic
retrieval settings.
Connection settings
Select Menu > Messaging and Options > Settings > E-
mail > Mailboxes, a mailbox, and Connection settings.
To edit the settings for the e-mail you receive, select
Incoming e-mail, and from the following:
User name — Enter your user name given to you by your
service provider.
Password — Enter your password. If you leave this field
blank, you are prompted for the password when you try
to connect to your remote mailbox.
Incoming mail server — Enter the IP address or host
name of the server that receives your e-mail.
Access point in use — Select an internet access point
(IAP).
Mailbox name — Enter a name for the mailbox.
Mailbox type — Defines the e-mail protocol that your
remote mailbox service provider recommends. The
options are POP3 and IMAP4. This setting cannot be
changed.
Security — Select the security option used to secure the
connection to the remote mailbox.
Port — Define a port for the connection.
APOP secure login (for POP3 only) — Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
My e-mail address — Enter the e-mail address given to
you by your service provider.
Outgoing mail server — Enter the IP address or host
name of the mail server that sends your e-mail. You may
only be able to use the outgoing server of your service
provider. For more information, contact your service
provider.
64
Messaging
To Next Page
Loading...
