Nokia N97 mini - Page 247

highest priority, the device connects to the internet
through WLAN, if available, and through a packet data
connection if not.
To create a new access point group, select Options >
Manage > New destination.
To add access points to an access point group, select the
group and Options > New access point. To copy an
existing access point from another group, select the
group, tap the relevant access point if it is not already
highlighted, and select Options > Organize > Copy to
other dest..
To change the priority of an access point within the group,
select Options > Organize > Change priority.
Packet data access points
Select Menu > Settings and Connectivity >
Destinations > Access point, and follow the instructions
on the screen.
To edit a packet data access point, open one of the access
point groups, and select an access point marked with
.
Follow the instructions from your service provider.
Select from the following:
Access point name — You obtain the access point name
from your service provider.
User name — The user name may be needed to make a
data connection, and is usually provided by your service
provider.
Prompt password — If you must enter the password
every time you log in to a server, or if you do not want to
save your password in the device, select Yes.
Password — A password may be needed to make a data
connection and is usually provided by your service
provider.
Authentication — Select Secure to always send your
password encrypted or Normal to send your password
encrypted when possible.
Homepage — Depending on the access point you are
setting up, enter the web address or the address of the
multimedia message center.
Use access point — Select After confirmation if you
want the device to ask for confirmation before the
connection using this access point is created, or
Automatically if you want the device to connect to the
destination using this access point automatically.
Select Options > Advanced settings and from the
following:
Network type — Select the internet protocol type to
transfer data to and from your device. The other settings
depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address
of your device.
DNS addresses — Enter the IP addresses of the primary
and secondary DNS servers, if required by your service
72
Connectivity