NHL-10
CCS Technical Documentation Service Tools
6 COMPANY CONFIDENTIAL ISSUE 2 01/2004
Copyright © 2003 Nokia. All Rights Reserved.
MJ-2 Module Jig
The MJ-2 Module Jig is used for testing the following modules:
• User interface
• Baseband and RF on system module
Product Code
MJ-2 Module Jig: 0770501
View of MJ-2
Figure 2: MJ-2
Note:
The nominal supply voltage for MJ-2 is +6.0 V.
The supply voltage must not exceed +12.0 V (min. 5.0 V).
Supply jig only when J1=regulated position.
To Next Page
Loading...
