Get started
3
1. Connect the charger to a wall
socket.
2. Connect the lead from the
charger to the charger
connector at the bottom of
your phone.
If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the
display or before any calls can be made.
■
Switch the phone on and off
1. Press and hold the power key as shown.
2. If the phone asks for a PIN or a UPIN code,
enter the code (for example, displayed as ****),
and select OK.
When you switch on your phone for the first time,
and the phone is in the standby mode, you are
asked to obtain the configuration settings from
your service provider (network service). Confirm
To Next Page
Loading...
