EN-30
Nokia Steel
v4.0 | November, 2017
4� Insert one side of the spring bar of the new wristband�
5� Put the wristband in place while pulling the knob to the left side�
6� Release the knob�
The wristband is now properly attached to your Nokia Steel�
7. Repeat the previous steps for the other side�
Calibrating the Hands
If you ever feel that the time displayed on your Nokia Steel is incorrect, you may need to
recalibrate the hands� To do so, perform the following steps:
1. In the Nokia Health Mate® app, go to My devices�
2� Tap your Nokia Steel.
3� Tap Set the time�
Put your Nokia Steel close enough to your mobile device� You may need to press the
reset button located at the back using the tool provided with your Nokia Steel if your
device cannot detect it on its own� If it doesn’t vibrate, try changing the angle of the
tool when you push the reset button�
To Next Page
Loading...
