Nokia TA-1114 User Guide

Nokia 106 (2018) User Guide
CHARGE YOUR PHONE
Your battery has been partially charged at the factory, but you may need to recharge it before
you can use your phone.
Charge the battery
1. Plug the charger into a wall outlet.
2. Connect the charger to the phone. When done, unplug the charger from the phone, then
from the wall outlet.
If the battery is completely discharged, it may take several minutes before the charging
indicator is displayed.
Tip: You can use USB charging when a wall outlet is not available. Data can be transferred
while charging the device. The efficiency of USB charging power varies significantly, and it
may take a long time for charging to start and the device to start functioning. Make sure your
computer is switched on.
LOCK OR UNLOCK THE KEYS
Lock the keypad
To avoid accidentally pressing the keys, use keypad lock. Select Go to > Lock keypad .
Unlock the keypad
Press , and select Unlock .
© 2023 HMD Global Oy. All rights reserved. 8

Nokia TA-1114 Specifications

General

Radio	FM radio
USB	microUSB 2.0
Loudspeaker	Yes
3.5mm jack	Yes
Model	TA-1114
Network Technology	GSM / HSPA
Bluetooth	4.2, A2DP, LE
SIM	Single SIM or Dual SIM
Alert types	Vibration
Memory Card Slot	microSD