Nokia TA-1192 User Manual

Nokia 110 (2019) User Guide
Set up your phone
1. Put your fingernail in the small slot at the
bottom of the phone, lift and remove the
cover.
2. If the battery is in the phone, lift it out.
3. Slide the SIM card into the SIM1 slot
with the contact area face down. If you
have a second SIM, slide it into the SIM2
slot. Both SIM cards are available at the
same time when the device is not being
used, but while one SIM card is active, for
example, making a call, the other may be
unavailable.
4. If you have a memory card, slide it into the
memory card slot.
5. Line up the battery contacts and put the
battery in.
6. Put the back cover back on.
Switch on your phone
Press and hold .
CHARGE YOUR PHONE
Your battery has been partially charged at the factory, but you may need to recharge it before
you can use your phone.
Charge the battery
1. Plug the charger into a wall outlet.
© 2023 HMD Global Oy. All rights reserved. 7

Nokia TA-1192 Specifications

General

Display	IPS LCD
CPU	Quad-core 2.0 GHz Cortex-A53
Card Slot	microSDXC (dedicated slot)
Operating System	Android 9.0 Pie (Go edition)
Network Technology	GSM / HSPA / LTE
Build	Glass front, plastic back, plastic frame
SIM	Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)
Loudspeaker	Yes
3.5mm jack	Yes
WLAN	Wi-Fi 802.11 b/g/n, hotspot
Bluetooth	4.2, A2DP, LE
GPS	Yes, with A-GPS, GLONASS, BDS
NFC	No
Radio	FM radio
USB	microUSB 2.0
Sensors	Accelerometer, proximity
RAM	2GB
Internal Storage	16GB
Front Camera	5 MP
Battery	3000 mAh, removable
Status	Available. Released 2019, August
Weight	153 g
Models	TA-1192