15
2. Connect the charger plug to the
charger connector in the device.
If the battery is completely discharged,
it may take a few minutes before the
charging indicator appears on the
display or before any calls can be made.
The charging time depends on the charger
and the battery used.
■ Switch the device on and off
Press and hold the power key.
If the device asks for a PIN code, enter the PIN code, and
select OK.
If the device asks for the lock code, enter the lock code, and
select OK. The factory setting for the lock code is 12345.
For more information about access codes, see ”Access
codes,” p. 23.
To set the correct time zone, time, and date, select the
country you are presently in, then enter the local time
and date. See also ”Clock,” p. 68.
Welcome application
The Welcome application starts when you switch on your device for the
first time. With the Welcome application, you may be able to access the
following applications:
Sett. wizard — Configure connection settings. See ”Settings wizard,” p. 17.
E-mail settings — Configure e-mail settings. See ”E-mail settings,” p. 53.
To Next Page
Loading...
