21
A memory card is inserted in the device.
You have messages in the inbox in Messaging.
You received new e-mail in your remote mailbox.
You have messages waiting to be sent in outbox.
You have missed calls.
Ringing type is set to Silent and Message alert tone and E-mail
alert tone are set to Off.
The device keypad is locked.
The loudspeaker is activated.
An alarm is active.
All calls to the device are forwarded to another number.
A headset is connected to the device.
or or A GPRS packet data connection is active, the connection is on
hold, or a connection is available.
or or A packet data connection is active in a part of the network
that supports EGPRS; the connection is on hold; a connection
is available. Your device may not use EGPRS in the data transfer.
or or A WCDMA packet data connection is active; the connection
is on hold; a connection is available.
or Bluetooth connectivity is switched on; data is being
transmitted using Bluetooth technology.
A USB connection is active.
Other indicators may also be shown.
To Next Page
Loading...
