Why am I getting a sync error on my Noland Engineering AM43?
The 'sync error' on the Noland Engineering Multiplexer typically arises from corrupted data. This manifests as a synchronization or framing error, resulting from an invalid START or STOP bit.
What causes lnfd error on Noland Engineering Multiplexer?
The 'lnfd error' on the Noland Engineering Multiplexer is generated by either a missing linefeed character or a sentence that contains too many characters.
What is char error on Noland Engineering AM43 Multiplexer?
The 'char error' on the Noland Engineering Multiplexer is a character error that occurs when an 8-bit ASCII character is detected.
What does dolr error mean on Noland Engineering AM43?
The 'dolr error' on the Noland Engineering Multiplexer is generated when a '$' (start of sentence) character is not received when expected.
A multicolor LED indicates operational status, error conditions, and data flow.
Combines data from marine navigational instruments under the NMEA 0183 Standard.
Identifies error channels and types with an alphanumeric code.
Details single and multiple error codes for channel and type identification.
Lists commands for device configuration, reset, and status queries.
General| Brand | Noland Engineering |
|---|---|
| Model | AM43 |
| Category | Multiplexer |
| Language | English |
To Next Page